
Short answer
Most asphalt roof replacements in Monmouth County run $9,000 to $22,000 in standard-value towns and $14,000 to $35,000 in higher-value towns, with large or luxury homes at $25,000 to $60,000. The band your house falls in is set by your municipality's median home value from ACS 2024 five-year estimates, not by your street. Inside that band, roof size, pitch, layers, decking condition and flashing work decide the final number.
On this page
Most asphalt roof replacements in Monmouth County run $9,000 to $22,000 in standard-value towns and $14,000 to $35,000 in higher-value towns. Large or luxury homes run $25,000 to $60,000. Metal roofing starts higher, at $18,000 to $35,000 in standard-value towns.
Those are ranges, not quotes. Monmouth County has 51 municipalities and roughly 264,490 housing units, and they do not share a roof. A 1960s ranch in the middle of the county and a shingle-style house three blocks from the water are different jobs with different numbers. Here is what actually sets the figure on your estimate.
Why your municipality sets the price band
The band comes from the median home value of your municipality, taken from the American Community Survey 2024 five-year estimates. It is a geographic input, not a judgment about your house. A town with a higher median home value sits in the higher band because material costs, roof sizes, architectural complexity and the scope of trim and flashing work on that housing stock tend to run higher across the board.
If you want the housing data for your specific town, each municipality page on the Monmouth County service area hub states that town's median year built, housing units, share built before 1980 and median home value, and explains what that housing stock means for a roof.
| Band | Asphalt shingle replacement | Standing seam or metal panel |
|---|---|---|
| BandStandard-value town | Asphalt shingle replacement$9,000 to $22,000 | Standing seam or metal panel$18,000 to $35,000 |
| BandHigher-value town | Asphalt shingle replacement$14,000 to $35,000 | Standing seam or metal panel$28,000 to $55,000 |
| BandLarge or luxury home | Asphalt shingle replacement$25,000 to $60,000 | Standing seam or metal panel$45,000 to $120,000 |
What moves the number inside the band
The band is wide on purpose, because the house decides where you land in it. Six things do most of the work.
Roof size, measured in squares
Roofers price by the square, which is 100 square feet of roof surface. That is not the same as your living space. A 2,000 square foot two-story colonial has far less roof than a 2,000 square foot ranch, because the ranch spreads the same floor area under one plane. A ranch and a colonial of equal size can be thousands apart for that reason alone.
Pitch and access
A walkable roof is faster and safer than a steep one. Once the pitch passes the point where the crew needs roof jacks, planks and staging to work, labor hours go up. Access matters too. A tight side yard, a fenced pool, a deck under the eave or a driveway the dumpster cannot reach all add time.
Complexity
Valleys, dormers, hips, chimneys, skylights, plumbing vents and sidewall transitions each cost money, because each one is cut, flashed and sealed by hand. A simple gable roof with two penetrations prices very differently from a split level with three roof planes and a dormer tie-in.
Existing layers
Monmouth County has a lot of houses that have already been reroofed once. Middletown's median home was built in 1970 and Howell's in 1985, which means plenty of roofs in those towns are on their second or third covering. A second layer doubles the tear-off and the disposal weight, and that shows up in the price.
Decking condition
Soft, delaminated or cracked plywood will not hold a nail and has to be replaced. On an older roof with past leaks around a chimney or a valley, expect some sheets. This is the single most common reason a cheap quote stops being cheap halfway through the day.
Flashing, ventilation and the edge details
Step flashing at sidewalls, counterflashing at the chimney, drip edge, ice and water shield at the eaves, ridge vent and intake all belong in the price. They are also the first things a low bidder leaves out or plans to reuse.
What a Monmouth County roofing estimate should include in writing
Ask for every one of these as a line item, not a lump sum:
- Tear-off of all existing layers, with the number of layers stated.
- Dumpster and disposal.
- Decking replacement, with the per-sheet price settled before work starts.
- Underlayment and ice and water shield, by product name and where it goes.
- New step flashing, counterflashing and drip edge, specified as new rather than reused.
- Shingle line and color, plus matched starter strip and ridge cap.
- Ventilation: ridge vent, intake, and anything being added or removed.
- The permit and the municipal inspection.
- Workmanship warranty length, in writing.
- Cleanup and a magnetic nail sweep.
Lightning Construction prices all of that at the free inspection and writes no change orders. The written estimate is the final price. Extra shingle layers, rotted decking and bad flashing, the three things that normally trigger a mid-job price increase, are found before the contract is signed and included. There is also no deposit. Nothing is due until the work is finished and you have inspected it.
Why two quotes on the same house differ by thousands
Usually it is scope, not profit margin. One contractor priced a full tear-off with new flashing and new decking allowance. The other priced an overlay with reused step flashing and no plywood. Both are a roof. They are not the same roof, and they do not last the same length of time.
The other common gap is accessories. The top tiers of GAF manufacturer coverage require the whole system from one manufacturer: starter strip, underlayment, ridge cap and ventilation. Swap two components for generic equivalents and the roof quietly drops to a lower tier. Lightning Construction is GAF Certified and licensed and insured under New Jersey Home Improvement Contractor registration 13VH12437000.
For the full breakdown of what drives an installed price statewide, read the New Jersey roof cost guide. It goes deeper on material choices and square counts than a county post should.
Permits, inspections and the day itself
Lightning pulls the permit from your municipality's own construction office under the New Jersey Uniform Construction Code and attends the inspection. That is true in every Monmouth County town, from the shore boroughs to the inland townships. You file nothing.
Most asphalt roofs here are torn off and replaced in a single day. The crew arrives early, protects the ground and landscaping, strips to the decking, repairs what is bad, installs underlayment and shingles, then sweeps the property for nails. Standing-seam metal takes two to four days because the panels are formed and fitted rather than nailed down in courses. As one Monmouth County homeowner put it: "Crew arrived just before 7am and had the job finished by 7pm. Courteous and very skilled, and the property was spotless."
Paying for it
Financing is available through GreenSky and FTL, including 24 months at 0% interest and 120-month terms with no prepayment penalty. If you are looking at incentive programs of any kind, confirm what currently applies with a tax professional before you count on it.
What to do next
Get the roof measured. A phone estimate based on your square footage is a guess, and a guess is what turns into a change order. Book a free inspection and written estimate and understand that a salesperson comes to the house, it is genuinely no obligation, and you will see photographs of what is actually on your roof.
If you want to see the scope of work and the shingle systems first, start with the roofing services page, or the Middletown roofing page for a look at how a specific Monmouth County town's housing stock is factored in.



