How Many Squares of Siding Does Your House Need? Measuring Before You Get Quotes

A square of siding is 100 square feet of wall. Here is how to measure your walls, subtract openings, add waste and sanity check a New Jersey quote.

7 min read
Straight-on view of a two-story home with light vinyl siding, a gable end and several window openings, with a retractable tape measure resting on the front walkway in midday light

Short answer

A square of siding is 100 square feet of wall surface. Measure the height and width of each wall, add the gable triangles, subtract only the large openings, then add about 10 percent for cuts and waste. The number you get is a way to check that the quotes you receive are describing the same house, not a way to price the job yourself.

On this page
  1. What a square of siding actually measures
  2. What you need to measure your own walls
  3. Measure the rectangles first
  4. Add the gables, dormers and bump-outs
  5. Which openings you subtract and which you leave in
  6. How much waste to add
  7. What squares do not cover
  8. How to use your number when quotes come in
  9. What the price actually depends on
  10. What to do next

A square of siding is 100 square feet of wall surface. Measure each wall height by width, add the triangles at the gable ends, subtract the big openings, add about 10 percent for cuts, and divide by 100. That gives you a square count you can hold two quotes against.

This is not how you price a siding job, and no honest contractor will quote one off a number you emailed. It is how you catch the quote that assumed one story when your house has two, or the one that skipped the back of the garage.

What a square of siding actually measures

A square is 100 square feet. Roofers use it, siding crews use it, and it exists because round numbers are easier to order and count than raw square footage. A wall 10 feet tall and 10 feet wide is one square. A two-story wall 40 feet long and 18 feet to the eave is 720 square feet, which is 7.2 squares.

Vinyl siding is commonly sold in boxes that cover two squares. Fiber cement comes in planks sold by the piece and by the bundle. Either way, the estimator converts your wall area into squares first, then into boxes or bundles, then adds the trim, corners and accessories that are counted separately.

One thing to get straight before you start: siding squares and roofing squares are different numbers. Your roof area has nothing to do with your wall area, and a steep roof can easily have more squares on it than the walls under it.

What you need to measure your own walls

  1. A 25-foot tape measure and someone to hold the other end.
  2. A phone to photograph each elevation and note the numbers on the photo.
  3. A pad with a rough sketch of the house from above, so you can label each wall as you go.
  4. Your siding course height, if you want to measure wall height without a ladder.

That last one is the trick worth knowing. Count the number of existing siding courses on a wall and multiply by the exposure of one course. Standard double 4 vinyl shows 8 inches of face per panel, so 27 courses is 18 feet. You can check it against a door, which is usually 80 inches of opening plus the frame.

Measure the rectangles first

Walk the perimeter and measure the length of each wall at ground level. Then get the height from grade to the bottom of the soffit on each side. On a sloped lot, the back wall is often taller than the front, and that difference is real material.

Multiply length by height for each wall. Add them all up. On a 26 by 40 two-story house with 18 feet from grade to soffit, the perimeter is 132 feet, so the rectangles alone come to 2,376 square feet, or about 23.8 squares.

If a wall changes height partway, split it into two rectangles and measure each one. Do not average it.

Add the gables, dormers and bump-outs

A gable end is a triangle. Its area is half the base times the height, so a gable 26 feet wide that rises 7 feet to the ridge is 91 square feet, just under one square. Two of those on the house above brings the running total to roughly 25.6 squares.

Dormers get measured the same way: the two cheeks and the face, each one a rectangle or a triangle. Bay windows, chimney chases and cantilevered bump-outs all have sides, and those sides get siding. Walk around the house once with the specific job of finding every surface that is not a flat main wall, because those are the surfaces people forget and they are the ones that drive labor up.

Measuring a gable without a ladder

Count the siding courses from the top of the main wall to the peak and multiply by the exposure. Twelve courses of double 4 is 8 feet of rise. It is close enough for a sanity check, which is all this exercise is for.

Which openings you subtract and which you leave in

Subtract large openings. Leave ordinary ones in.

OpeningSubtract it?
OpeningGarage door, 16 by 7 feetSubtract it?Yes, 112 square feet
OpeningSliding glass wall or large picture windowSubtract it?Yes, if it is over roughly 30 square feet
OpeningStandard double-hung windowSubtract it?No
OpeningEntry doorSubtract it?No
OpeningAttached garage wall shared with the houseSubtract it?Not siding, so leave it out entirely

The reason ordinary windows stay in the total is that the panels cut around them become scrap. You buy the material, you cut a hole in it, and the offcut usually cannot be used anywhere else. Subtracting every window makes your number look tidy and makes you short on material.

How much waste to add

Add 10 percent to the total on a simple house with long straight runs and few corners. Add closer to 15 percent when the house has multiple gables, dormers, angled walls, a turret or a wide board profile that has to line up across an inside corner.

For the example house, 25.6 squares plus 10 percent is about 28 squares. That is the number a contractor would be ordering against, give or take how he handles the garage.

Waste is not padding. It is the cut at every window, the starter course that gets trimmed to follow a grade, and the panels sacrificed to keep a pattern aligned. A crew that orders exactly to the measurement runs out on the last wall and either stops for a delivery or stretches the material somewhere it should not be stretched.

What squares do not cover

Squares cover field siding only. These items are counted in linear feet or by the piece, and they are where quotes diverge most:

  • Outside and inside corner posts
  • J-channel at every window and door opening
  • Starter strip, utility trim and finish trim
  • Soffit, which is measured by its own square footage on the underside of the eave
  • Fascia wrap, measured in linear feet along the eave and rake
  • Window and door casing, frieze board, band board and gable rake trim
  • House wrap and any insulation board behind the siding

Two quotes at the same square count can be thousands apart because one wraps the fascia in coil stock and the other does not. When you compare, compare the trim line by line, not the headline. The guide to siding options for New Jersey homes covers how vinyl and fiber cement differ in what trim they need.

How to use your number when quotes come in

Ask each contractor what square count he measured. If three estimators are within a square or two of each other and of you, they are all pricing the same house and you can compare the rest of the scope honestly. If one is five squares lighter, he either missed an elevation, left out the gables, or is planning to leave an existing wall alone. Ask which.

Also ask what happens if the walls are worse than they look once the old siding is off. Rotted sheathing and failed house wrap are the usual reasons a siding price moves mid-job. Lightning Construction finds those conditions at the free inspection and prices them into the written estimate, so there is no change order later. There is no deposit either, and nothing is due until the work is finished and you have inspected it.

What the price actually depends on

Siding in New Jersey runs $10,000 to $22,000 in standard-value towns, $16,000 to $38,000 in higher-value towns and $30,000 to $70,000 for large or luxury homes. The band comes from the municipality's median home value in the ACS 2024 five-year estimates, and you can see the towns and counties covered on the service areas page. Within a band, the drivers are wall area, the material, how much trim the house has, the number of stories and how much has to come off first.

Do not take a square count and multiply it by a per-square number you found online. That math ignores tear-off, disposal, house wrap, trim, the permit and the condition of what is behind the wall.

What to do next

Measure the house once so you know roughly what you own, then let a contractor measure it properly. Lightning Construction is veteran-owned, family-operated, GAF Certified and registered in New Jersey as Home Improvement Contractor 13VH12437000, pulls the permit in every municipality and attends the inspection. See what is included on the siding page, then book a free estimate. The visit is free with no obligation, and a salesperson does come to the house.

Published November 1, 2026 ← All articles

Straight answers.

One square is 100 square feet of wall surface, the same unit the roofing trade uses. A wall 10 feet high and 10 feet wide is one square.

Subtract large openings such as a garage door or a sliding glass wall, and leave ordinary windows in the total. The material you lose cutting around a standard window roughly cancels out the opening itself.

Around 10 percent on a simple rectangular house, and closer to 15 percent when there are many gables, dormers, angled cuts or a pattern that has to line up across a wall.

No. Siding in New Jersey runs $10,000 to $22,000 in standard-value towns, $16,000 to $38,000 in higher-value towns and $30,000 to $70,000 for large or luxury homes, and the band is set by the municipality's median home value, not by your square count alone.

No. A contractor measures the house as part of the free inspection and written estimate. Measuring yourself is useful only as a check that two quotes are describing the same amount of wall.

Ready for a free estimate?

Free inspection, written estimate, nothing down, zero pressure — anywhere in New Jersey.

CallFree Estimate